IJKP-18: Air Down / Air Up Tool with Gauge

Description

This tool comes standard with every 4-tire air system except Bluetooth versions.

Compatibility

All Innovative AT Products 4-Tire Air Systems:

• IJKP-1 and 1-ARB
• IJKP-10 and 10-ARB
• IJKP-14 and 14-ARB
• IJKP-15 and 15-ARB
• IJKP-19 and 19-ARB
• IJKP-24 and 24-ARB
• IJKP-27 and 27-ARB

Product Description

If you have any one of my Air Systems you know how easy it is to fill 4 tires at once.  Now you can use the same system to air down 4 tires at once!  And then when you go to fill up, have the system signal you when filled to anywhere you set it between 25 and 50 psi.

How does it work?

With your air lines connected and the tool in place (in line anywhere in system), simply slide the blue valve and it will bleed the air from all of your tires.  Close the valve momentarily to get a reading on the gauge or refer to your TPMS readouts on your dash (2013+ Jeeps) until you get down to the pressure you desire.  And when it comes to filling, the adjustable check valve on the back can be set between 25 and 50 psi.  Once your tires reach your set point the check valve will open producing an audible release of air and prevent tires from overfilling.  At that point, turn off your compressor and you are done!

Features of the Tool

• Installation in less than a minute
• Deflate as low as you want (you must manually close valve once down to desired pressure)
• Inflate to an adjustable set point anywhere from 25 to 50 psi
• Can be simply plugged into system when ready to use, or left permanently mounted under seat on back side of seat connection with some systems
• No more dealing with expensive screw-on bleed valves and trying to get them adjusted equally
• No more need to check each tire pressure when airing down
• Self balancing – since all tires are linked the pressures will be the same when airing down and airing up
• Only 1 tool required to support deflation and inflation of all 4 tires at once